Vacuum leak detector VLXE-SAB T../P..

FOR THE MONITORING OF SEVERAL TANKS AND/OR PIPES AT GAS STATIONS

The vacuum leak detection system VLXE-SAB T../P.. monitors up to 12 double-walled tanks and/or pipes. It is designed for outdoor installation and suitable for certain (ex-) zones.

Depending on the model the VLXE-SAB T../P.. is equipped with 1 or 2 pumps as well as an explosion-protected sensor per tank/pipe. In case of a vacuum loss at any tank/pipe, an alarm is triggered. This is indicated as well on the central display outside as separately for each sensor inside the housing.

Monitorable tanks/containers:
> Unpressurized tanks
T34: Only for tanks with a suction line to the deepest point of the interstitial space
T330: Tanks with a diameter of ≤ 3.0 meters and a sufficient underpressure resistance

Monitorable pipes:
> Metallic and non-metallic pipes
P410: For filling lines and vapor recovery lines
P500: For suction lines, filling lines, and vapor recovery lines

Monitorable liquids:
Liquids hazardous to water, for which the brass design of the leak detector is sufficiently resistant. Occurring vapor-air-mixtures must be heavier than air as well as classifiable in gas group IIA or IIB and temperature code T1 to T3, like gasoline, diesel, AdBlue for example.

Options and accessories:
• Flashlight
• Remote monitoring LOD